Using a Respimat Soft Mist Inhaler for the First Time: Step-by-Step
Wash your hands. Remove the clear base. Place the metal cartridge into the inhaler. Push the cartridge on a hard, flat surface. You should hear a click. Write your discard date on the label. Replace the clear base. It should click. Turn the clear...
Wash your hands.
Remove the clear base.
Place the metal cartridge into the inhaler.
Push the cartridge on a hard, flat surface.
You should hear a click.
Write your discard date on the label.
Replace the clear base. It should click.
Turn the clear base until there’s a click.
Open the cap.
Press the button.
Look for a mist.
Repeat steps 10 and 11 until there’s a mist.
Repeat steps 10 and 11 until there are 4 mists.
Close the cap.
Check the dose counter.
Sit or stand up straight.
Turn the clear base until there’s a click.
Open the cap.
Breathe out fully.
Close your lips tightly around the mouthpiece.
Breathe in deeply as you press the button.
Hold your breath for 5 to 10 seconds.
Breathe out slowly.
Wait 1 minute.Repeat steps 17 to 23, if needed.
Rinse your mouth out.
Spit.